This tailwheel was on my Tcart for years after purchase until I got around to getting one on that actually met the type certificate. It worked great and I wouldn't have pulled it if I wasn't in the standard cat airworthiness. Maybe someone here with an experimental can use it.
Solid wheel on integral hub. Bearings look to be pressed in ball cages. Has a zirc fitting that wouldn't take grease with a normal grease gun because the gun fitting wouldn't fit into the zirc bore. So I grinded it flat and drilled a dimple so a needle gun could grease it. Always has been greased and sounds great when spun. I can extract the zirc if you want to start fresh on what fitting will work best for you.
5.5" X 2.25"
Axle bore is 5/8"
$80 and I'll pay the cheapest shipping I can find or you can pay expedited delivery.
Solid wheel on integral hub. Bearings look to be pressed in ball cages. Has a zirc fitting that wouldn't take grease with a normal grease gun because the gun fitting wouldn't fit into the zirc bore. So I grinded it flat and drilled a dimple so a needle gun could grease it. Always has been greased and sounds great when spun. I can extract the zirc if you want to start fresh on what fitting will work best for you.
5.5" X 2.25"
Axle bore is 5/8"
$80 and I'll pay the cheapest shipping I can find or you can pay expedited delivery.
