• Become a Subscribing Member today!

    J3-Cub.com is the largest community of J3-Cub pilots, owners and enthusiasts. With over 1000 active members, we have fostered a vibrant community and extensive knowledge base.

    Access to the J3-Cub.com community is by subscription only. Membership is only $49.99/year or $6.99/month to gain access to this community and extensive unmatched library of knowledge.

    Why become a Subscribing Member?

    • J3-Cub.com hosts a library of over 13 years of technical discussions, J3 data, tutorials, plane builds, guides, technical manuals and more.
    • J3-Cub.com also hosts an extensive library of J3-Cub photos.
    • You will also receive two J3-Cub decals!

    Become a Subscribing Member and access J3-Cub.com in full!

    Subscribe Now

NAS3A1 Carburetor Stumbles on C-85

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 10, 2019
Messages
31
Reaction score
3
My carburetor (NAS3A1) (C-85) is "Stumbling" when going from the idle circuit to the run circuit. It has not done this in the short time that we have had it. The only thing we have done is set the idle rpm up from about 400 rpm to 550 rpm. On the ground static, if you slowly increase the rpm you can get it to accelerate to a high rpm. If you advance the throttle fairly rapidly it will almost die. These observations are with the airplane (STATIC) on the ground. I think that if you were in flight that air flow through the prop would disguise the symptom??????? Please advise. Thanks, Bill
 

Latest posts

Back
Top